感謝大家支持,開設26週年PUNCHBROTHERSTOUR.COM 創業慶

PUNCHBROTHERSTOUR.COM

詳細請見這裡
我的商店 我的商店 變更
  • 當日配送
  • 廣告
  • 可保留
  • 店舖取貨

博立方Pixhawk M9N PS白色飛行控制器+I2C+WIFI V2.0 B+電源 組

※PUNCHBROTHERSTOUR.COM 限定款式
YouTuber 為大家介紹商品的使用感受!
介紹影片請見這裡

網路販售
價格(含稅)

5385元

  • 登錄科梅利卡號並使用科梅利卡付款即可
    科梅利點數 : 178獲得點數

關於科梅利點數

減少購買數量
增加購買數量

到店取貨 到店取貨
(免運費)

取貨店舖:

選擇店舖

確認附近店舖

預計交貨時間:

13時前下單→17時前備妥

17時前下單→隔天早上前備妥

關於取貨方式與運費

加入購物車

配送 配送

預計交貨時間:

11月23日左右預計送達。

僅限信用卡或貨到付款。若使用其他付款方式,請這裡確認相關資訊。

※若於週末、國定假日下單,或因庫存狀況影響,商品送達可能需要較長時間。

關於當日出貨條件

關於取貨方式與運費

加入購物車

加入願望清單

已加入願望清單

博立方Pixhawk M9N PS白色飛行控制器+I2C+WIFI V2.0 B+電源 組的詳細資訊

Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller Features: Pixhawk 2.4.8 support the latest official ardupilot firmware and PX4 firmware. 1. The advanced 32-bit ARM CortexM4 high-performance processors(2MB flash), can run NuttX RTOS real-time operating system; 2. 14 PWM / servo output; 3. Bus interface (UART, I2C, SPI, CAN); 4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe; 5. Provide automatic and manual modes; 6. Provide redundant power input and failover; 7. Multicolor LED lights; 8. Provide multi-tone buzzer Interface 9. Micro SD recording flight data;   Specifications:  Interface 1 .5 high voltage compatible UART 1, 2 with hardware flow control 2. 2 CAN 3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input 4.Futaba SBUS compatible inputs and outputs 5.PPM Signal Input 6.RSSI (PWM or voltage) Input 7.I2C 8.SPI 9.3.3 and 6.6VADC input 10. External MICRO USB Interface   WWIFI V2.0 M10 B: PIXHAWK2.4.8+4G TF Card+Safety Button+Buzzer+PPM Encoder+I2C Expansion Board+3 .25,6Pin1.25,3Pin2.5.4)+M9N GPS+GPS Holder+ 3DR PowerModule+Shock Absorber+WIFI V2.0 B Power Module: For PIXHAWK 2.4.8 :used for PIXHAWK2.4.8 AND APM2.8 Flight Control For PIXHAWK PRO :used for PIXHAWK PRO Flight Control For PIXHAWK 6C :used for PIXHAWK 6C Flight Control Description: This Power Module PRO provides a simple way to supply regulated 5.2V to flight controller from the battery while providing current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable. It comes with pre-soldered wires, capacitor, and XT60 connector on both ends, along with shrink tubing on the PCBA for physical protection. Specification: Input Voltage: 2S-12S PCB Cont. Current Rating: 60A PCB Burst Current Rating: 100A (<60 Sec) Max Current Sensing: 120A Output: DC 5.2V & 3A Max Voltage Divider: 18.182 Amperes per Volt: 36.364 Weight: 20g Please Note: - The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. You can refer to this chart for reference. RGB: The powerful features of Pixhawk are self-evident. Its integrated RGB full color multifunctional indicator light has high brightness, making it easy to identify flight control status. Compared to previous APMs, it is more intuitive and clear, making it a great design. But the problem lies here: this RGB LED is facing upwards and can only be viewed on the ground, unable to recognize flight control status in the air. Additionally, some racks have a fully enclosed design, such as the SKY-HERO, where the flight control can be hidden between two central boards, making it difficult for users to easily connect USB cables while being well protected. So we referred to the official accessory design and launched this two in one Pixhawk RGB module. The Pixhawk RGB module has the following characteristics: ·Extend the RGB indicator light to the exterior of the aircraft to display; ·Extend the USB port to facilitate external connection to the USB cable, without being limited by the flight control installation location; ·The Toshiba LED controller and Osram\'s RGB high brightness LED are identical to those on the Pixhawk board; ·Molex original 1.25 connector and HRS original USB socket ensure good contact stability. M9N GPS Module M9N is a GPS module commonly used in unmanned aerial vehicles, with the following characteristics and applications: High precision positioning: The M9N adopts advanced GNSS technology, supports multiple satellite navigation systems, and can provide high-precision position positioning information. For unmanned aerial vehicles, it can achieve accurate positioning and navigation. Multi system support: The M9N supports multiple satellite navigation systems, including GPS, GLONASS, Galileo, BeiDou, etc. This allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability. Quick positioning: M9N has fast cold start and hot start times, which can quickly obtain satellite signals and perform positioning, making it crucial for the rapid takeoff and task execution of unmanned aerial vehicles. Strong anti-interference ability: M9N has excellent anti-interference performance, which can work stably in complex electromagnetic environments and is not susceptible to interference from other electronic devices. In drone applications, M9N can be used in the following aspects: Positioning and Navigation: The M9N provides accurate position and speed information to help drones achieve precise navigation and flight control. Waypoint navigation: By inputting pre-set waypoint information into M9N, unmanned aerial vehicles can automatically fly according to the route, achieving autonomous waypoint navigation tasks. Multi aircraft collaboration: Multiple drones can use the M9N module for positioning and synchronization to achieve applications such as team collaborative flight and formation flight. Return to return: The M9N can provide accurate return positioning information, enabling the drone to safely return to the takeoff point or preset return point. M9N can search for more satellites outdoors with higher accuracy, faster search speed, and better stability.(The specific number of star searches is determined by the environment at that time.) I2C: PPM: WIFI V1.0 and V2.0 use 8bit CPU, only support UDP WIFI V3.0 use 32 BIT CPU, support TCP and UDP. WIFI V2.0 and V3.0 use external antenna (5DB) 商品備註・物品狀況:全新・最新關注時間:2026-10-17
  • 博立方Pixhawk M9N  PS白色飛行控制器+I2C+WIFI V2.0 B+電源 組
  • 1-_GPS_4d563422-fb16-4cc7-949a
  • Pixhawk 2.4.8的比價推薦- 2026年10月|飛比價格
  • pixhawk ラジコン」の人気商品一覧・価格比較 - 価格.com
  • 博立方Pixhawk PRO白色高套+I2C+PPM+R B+OLED+支架+M9N+電源組| 露天市
  • Pixhawkフライトコントローラー – RCDrone
  • 博立方Pixhawk PRO白色高套+I2C+PPM+R B+OLED+支架+M9N+電源組| 露天市
  • pixhawk ラジコン」の人気商品一覧・価格比較 - 価格.com
  • pixhawk ラジコン」の人気商品一覧・価格比較 - 価格.com
  • Amazon.co.jp: hobbyant Pixhawk PX4 フライトコントローラー Pixhawk
  • Amazon.co.jp: HAWK
  • Pixhawk 2.4.8的比價推薦- 2026年10月|飛比價格
  • Pixhawkフライトコントローラー – RCDrone
  • Amazon.co.jp: Pixhawk PX4 PIX 2.4.8 フライトコントローラー 32
  • pixhawk - 交通工具- 人氣推薦- 2026年10月| 露天市集
  • pixhawk ラジコン」の人気商品一覧・価格比較 - 価格.com

尋找相同分類的商品

暢銷商品排行榜

查看更多此分類商品

查看此商品的人也看了以下商品

附近賣場的商品

查看更多此分類商品

顧客評論

推薦度  4.9分

目前有 79則評論。